Starting Your Volkswagen or Audi
Early Audi models use a slot in the dashboard but do not use a Start/Stop button. The fob itself is pushed to start or stop the car. If the key fob battery is dead, the vehicle will already recognize the fob when inserted.
Audi and Volkswagen models that use the Start/Stop button and have a slot in the dashboard, as shown, insert the fob into the dashboard slot and press it to start while depressing the brake pedal as if the fob were the Start/Stop button. The actual Start/Stop ignition button is disabled.
In models that do not feature a slot for the fob, look for the symbol of a key with lines radiating from it, as shown. It will be to the right of the steering column on the dashboard (Audi) or on the right side of the steering column itself (VW).
In the latest Audi Q7, the symbol is just in front of the center console storage area. Touch the tip or the back of the fob to the symbol – or in the case of Q7 simply drop the fob on the symbol – and press the Start/Stop button while depressing the brake pedal, all at the same time.
In 2018, the mark is moved to the driver’s side cup holder in the Audi A5 and Q5. The mark is smaller and shaded and so a bit difficult to see. As with the Q7, the key fob can be dropped into the cup holder, and starting the car becomes a one hand (and one foot) operation. Press the Start/Stop button while stepping on the brake. It took two tries to before the key fob was recognized in our test car, but it did work.
Note: If you have made an attempt to start the vehicle without success, there may be residual pressure in the brake system and a new warning light may appear (left) or text message to Step on the Brake. Press the brake pedal very, very hard when trying to start the vehicle again to be sure that the release switch behind the pedal is engaged. Check out this page for more!
Click here for video help with VW and Audi models and key fobs.