Buick opening instructions updated

Buick opening instructions

We recently updated Buick opening instructions when the battery in the key fob dies. That’s on this page, the Buick dead key fob page.

This was necessitated by the new Envista introduced in 2024. Most Buick’s today hide their key holes, but the Envista is a whole new ball game. The key hole or lock cylinder is hiding behind an oval cap seen towards the rear of the driver’s door handle (right), which would need to be removed to expose the cylinder.

Removing the cap requires pulling the handle out and using the mechanical key to press on a difficult to see spot. See the page for full instructions.

Starting the car hasn’t changed, but it will assume that the start battery is good. And if not, we will can get you inside and ready for a jump start.

——————————————————————-

Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the  use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.

Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.