Hill Start Assist, Hill Hold Assist and Malfunction Indicators

Hill Assist

Hill start assistHill start assist indicatorThese are Hill Start Assist (HSA) Indicator symbols. Hill start assist applies the brakes to hold the vehicle after it is brought to a stop on a slope. This makes it easier for a driver to pull away without using the park brake. The indicators may be seen in green or black and white. In the latter case, a message will likely also be seen in the information screen

  • Before continuing, is one of these truly your symbol?? If yes, read on below.
  • Otherwise, you can return to our main Manufacturer Symbols pages and scan again!

As a general rule the hill start assist works as follows. When the system is active, the vehicle remains stationary for a few seconds after the brake pedal is released. This gives the driver time to move the foot from the brake pedal to the accelerator pedal without the vehicle moving.

The brakes release when the accelerator is pressed and the vehicle begins to move forward, or the system exceeds the time allowed for automatically applying the brakes.

Hill start assist activates when the vehicle is in any forward gear and facing uphill, or when it is in reverse and facing downhill.

Hill hold assist

Hill Holder Indicator SymbolHill hold assist indicatorThese are Hill Hold Assist Indicator symbols, which is clearly related to the Start Assist described above. In fact, it is the same system by a different name. The indicator will be illuminated when the hill holder switch is activated.

Since the system also makes use of the vehicle’s brakes, a brake problem is indicated if the light does not come on when the switch is activated. If this occurs, contact you dealer or authorized service center as soon as possible. Again, these symbols very much resemble those for grade assist and are thus included here.

Malfunction indicators

Hill hold assist malfunction indicatorHill start assist indicatorHill start assist trouble indicatorHill hold off indicatorHill Start Assist Off IndicatorThese versions indicates a problem with the Hill Start or Hill Hold Assist system or it has been turned off. As a malfunction indicator, they are usually seen in yellow/amber/orange. If it is seen, your dealer or a qualified service shop will be needed. The symbols are shown as a car or SUV on an angled line alone or inside a circle which itself is inside brackets.

A symbol seen with the word OFF or in green with a line through it are also malfunction indicators.

The circle and brackets are commonly used in symbols that involve the the vehicle’s brake system, which is a big part of these systems.

Snow or mud modeTerrain Selector SymbolNote similar symbols like the ones to the right are Terrain Assist Indicators. You can see more about them here

——————————————————————-

The material on these pages is provided for information sharing purposes only and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business, nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.

Remember — only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.

Privacy Policy

Permanent link to this article: https://dashboardsymbols.com/2026/03/hill-start-assist-hill-hold-and-malfunction-indicators/