4 Wheel Drive
These are 4 Wheel Drive Low Indicator symbols. They indicates that the 4 wheel drive is engaged at a low gear ratio. This ratio is useful when maximum power or traction is needed for steep climbs, sandy or muddy conditions, or off-road driving. Four wheel drive is often shown as 4×4 in publication and may be used in the symbol. LOW may be spelled out or abbreviated.
- But first, is one of these truly your symbol?? If yes, then continue on below.
- Otherwise return to our main Text Symbols page and scan again!
Many, Many More Versions
These two are corresponding 4 Wheel Drive High indicators. The High setting is the default setting in a 4 wheel drive vehicle for normal driving conditions. For this reason, vehicle manufacturers rarely add this indicator. If it is added, High may be spelled out or abbreviated (HI). One manufacturer simply uses a 4×4 Indicator to mean that the vehicle is in 4×4 HIGH.
This indicator, 4WD AUTO, states that the vehicle is in AUTO mode. The vehicle will automatically engage 4 wheel drive when a loss of traction is sensed. Otherwise, the front axle is engaged, but the vehicle’s power is sent only to the rear wheels.
These symbols, a 4×2 or 2H Indicator, say that a 4 wheel drive vehicle is supplying power only to the rear wheels. The use of the rear wheels only is the correct choice in typical driving conditions. That is, smooth, dry roads.
The 4A, 4×4 Auto Indicators and the stick figure indicator with 4WD text in the center both say that 4-wheel drive will be available automatically for additional traction. Only electronically-controlled 4-wheel drive systems will have this available. These indicators become 4 wheel drive trouble lights if they remain on when the system is not engaged.
This symbol with the open circles is used in Australia and New Zealand to indicate only that the 4-wheel Drive system has been engaged. In North America, the same symbol is usually used to indicate a problem with an All-wheel Drive system, although Chevrolet has begun using it to also indicate the system is engaged. Click here for more.
General Motors uses an indicator for five possible choices. Their system can be set to AUTO (automatic (AUTO), 4 high (HI), 4 LOW, 2 wheel drive (2WD) and finally N (or NEUTRAL in yellow/amber), seen below, if it is left in neutral. This final setting is useful as a warning if it has been left in neutral accidently. It indicates that nothing is engaged. The vehicle could roll away and won’t move if placed into gear!
In all cases, the various 4-wheel drive systems are choices that can be made by the driver using either a lever or buttons. If the system will allow a different selection, or if a 4×2 indicator remains illuminated, contact your dealer or authorized service center immediately. Driving will be possible, but only at reduced speed.
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY