How to Start a Volkswagen or Audi with a Dead Key Fob
Starting Your Volkswagen or Audi
- But first, if you are still locked out, click here for help getting inside!
- Second for video help, click here!
- Finally, if you need another manufacturer, click here.
Early Audi models use a slot in the dashboard but do not use a Start/Stop button. The fob itself is pushed to start or stop the car. If the key fob battery is dead, the vehicle will already recognize the fob when inserted.
Audi and Volkswagen models that use the Start/Stop button and have a slot in the dashboard, as shown, insert the fob into the dashboard slot and press it to start while depressing the brake pedal as if the fob were the Start/Stop button. The actual Start/Stop ignition button is disabled.
In models that do not feature a slot for the fob, look for the symbol of a key with lines radiating from it, as shown. It will be to the right of the steering column on the dashboard (Audi) or on the right side of the steering column itself (VW).
In the latest Audi Q7, the symbol is just in front of the center console storage area. Touch the tip or the back of the fob to the symbol – or in the case of Q7 simply drop the fob on the symbol – and press the Start/Stop button while depressing the brake pedal, all at the same time.
In 2018, the mark is moved to the driver’s side cup holder in the Audi A5 and Q5. This is also true of the A3 and Q3 beginning about 2021. The all electric eTron GT uses this mark as well. The mark is smaller and shaded and so a bit difficult to see. As with the Q7, the key fob can be dropped into the cup holder, and starting the car becomes a one hand (and one foot) operation. Press the Start/Stop button while stepping on the brake. It took two tries to before the key fob was recognized in our test car, but it did work.
However, in 2019, the A5 now has the mark at the front of the center console storage area, as shown to the right. Again the key fob can be dropped onto the spot, and starting the car needs only a single hand (and foot). Press the Start/Stop button while stepping on the brake. Our test car started first time in this case.
The new (2019) Q8, and now the Q7, also has the marking in a cup holder. It is the front one in this case. However, we noted a slot between the cup holders adjacent to the 12 volt power outlet and shaped very much like the key fob, Sure enough, the fob was recognized when placed inside the slot.
Models are now being electrified. The e-tron GT uses the front cup as in the images above. However, the original e-tron and e-tron Sportback the mark is found in front of the of the cup holders (right). We have not had access to all electric models, but a back up location will likely be found in or near the cup holders.
By 2023, the A4 and S4 models sport the mark on the center console, just in front of the console storage area.
All this is to say that there will be a mark somewhere in all Audi and VW models, and in all likelihood if it is not found on the dashboard or the side of the steering column, it is most likely to be found somewhere on the console area.
The mark in Volkswagen’s new ID4 EV, the mark is moved to the front area of the center console. This follows the trend in Audi models. Originally, the front area is for storage and has removeable spacers. We found the mark by removing the front spacer (first image). Later, the same area was converted to cup holders. The mark is found in the first cup holder (closest to the driver) (second image).
Note: If you have made an attempt to start the vehicle without success, there may be residual pressure in the brake system and a new warning light may appear (left) or text message to Step on the Brake. Press the brake pedal very, very hard when trying to start the vehicle again to be sure that the release switch behind the pedal is engaged. Or wait a few minutes and try again.
Click here for video help with VW and Audi models and key fobs.
… Return to Part I: Getting In
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
There are three general styles of key fobs in use with Volkswagen and Audi models. With the older style shown to the right, press the chrome button on the back of the key fob (remote control or ‘clicker’) to release the spring-loaded mechanical key, which remains attached to the key fob.
Newer Volkswagen and Audi models use what they called an Advanced Key, shown to the left. The mechanical key is separated 
from the fob (or remote control or ‘clicker’) by pressing the button on the back side of the fob, shown with the arrow, while pulling on the same key ring end.
And yet a fourth key fob from Audi has a chrome button on the back, similar to the unit above, but below the chrome end. push the button and pull on the key ring end to remove the mechanical key. We saw it first in the new 2019 Q8.