Tag: Dynamic Stability Control

Dynamic Stability Control / Electronic Stability Program

Stability Control

Dynamic Stability Control IndicatorThis is a Dynamic Stability Control (DSC) or Electronic Stability / Stabilization Program (ESPsymbol. These are electronic suspension control systems combining elements of braking, steering and suspension to keep the vehicle under control. If an exclamation point is seen next to the symbol, it indicates a system failure.

  • But first, is one of these truly your symbol?? If yes, continue on below.
  • And check out the video.
  • Otherwise return to our main Picture Symbols page and scan again.

These are a unique set of symbols that are part of the main group of Stability Control indicators. It will have an on off switch, and will most often be lit if the system is turned off. Some manufacturers use the symbol to denote systems that they call Anti-Slip Regulation (ASR) (meaning traction control) and Electronic Differential Lock (EDL), which is disabled if a fault in the ASR is detected.

Note that Stability Control systems work by applying brake action to individual wheels when a loss of steering control is detected. Braking may be applied to an outer front wheel to counter oversteer, or an inner rear wheel to counter understeer. Its important to note that some systems, depending on the manufacturer, may reduce engine power until control is reestablished.

Dynamic Stability ControlDSC 4x4 failed indicatorA flashing symbol likely means the system requires service. The inclusion of the ‘4 x 4’ is a variation in the appearance of the symbol used in 4-wheel drive vehicles.

Remember that these advanced systems come into play in extreme driving conditions, such as poor weather or rounding a curve excessively fast. Your vehicle is safe to drive with them disabled under most conditions. Contact your dealer or authorized service center for repairs.

Here’s a video describing when and how these lights may appear.

——————————————————————-

Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the  use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.

Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.

Permanent link to this article: https://dashboardsymbols.com/2024/03/dynamic-stability-control-electronic-stability-program/