We recently updated Buick opening instructions when the battery in the key fob dies. That’s on this page, the Buick dead key fob page.
This was necessitated by the new Envista introduced in 2024. Most Buick’s today hide their key holes, but the Envista is a whole new ball game. The key hole or lock cylinder is hiding behind an oval cap seen towards the rear of the driver’s door handle (right), which would need to be removed to expose the cylinder.
Removing the cap requires pulling the handle out and using the mechanical key to press on a difficult to see spot. See the page for full instructions.
Starting the car hasn’t changed, but it will assume that the start battery is good. And if not, we will can get you inside and ready for a jump start.
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster.
The following are warning lights and indicators found in vehicles built by Buick. Click the link to the right of each one to learn more.
How They Are Presented
They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are over 50 of them, so search carefully!
Need the symbols for another manufacturer? Click here!
Models examined include Cascadia, Enclave, Encore, Envision, Envista, Lacrosse, Regal, and Verano.
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
Finally, if you need another manufacturer, click here.
GM vehicles use three different style keys, of which Buick uses the last two. There are several starting options, and we have videos here.
So, find your model, and if the main start battery is still good, we’ll get you underway…
With the flip key key fob, the mechanical key remains attached to the fob, but several back-up locations are used. In the BuickVerano, Regal (through 2017) and pre-2014 Lacrosse, remove the cup holder from the center console in front of the storage area. This may be the entire cup holder assembly (above right), or simply a cup holder insert (below right).
Look for a notch at the top rear of the cup holders to insert a finger or tool to aide removal. Then place the transmitter in the transmitter pocket with the buttons facing up. The pocket will be shaped somewhat like the key fob.
Note that, as can be seen, the console areas look different from model to model, but the pocket is indeed beneath the cup holders. With the key fob in place and with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal.
The back up location is changed in the Regal beginning with the 2018 model year, and the car uses a newer key fob. The spot is in a narrow compartment at the front of the center console, as can be seen in the image at right. And for the first time in any GM vehicle, the spot is marked. There is an image of a padlock with lines radiating from it, meant to invoke radio waves.
Place the key fob in the compartment and step on the brake and start the vehicle as normal using the Start / Stop button.
For the LaCrosse in 2014, the transmitter pocket is moved into the storage area inside the armrest near the auxiliary power, USB and audio ports (right). Place the transmitter in the pocket.
Once again, with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal. Look for video help here.
The newest key style was introduced in 2014. It features a removable key. Note that there are still some flip keys in use. The Buick Encore, with exception, and Envision, until 2021, crossovers will use this spot. Simply drop the key fob into the front cup holder with the buttons up, and start the car as normal. Check out videos for these models here.
The exception is the Encore GX, beginning with the 2020 model. There is a small depression at the rear of a tray on the center console that is just in front of the center console storage area. This is the back up spot. The new Envista model introduced in 2024 uses this spot as well. Drop the key fob onto this spot with the buttons up and start the car as normal, again pressing the Start / Stop button while stepping on the brake.
And the 2021 Envision finds the back up spot moved to the front of the center console storage area, See the image to the right. Inside and at the front of the console there is a small, flat depression. Drop the key fob onto this spot with the buttons facing up and start the vehicle as normal, stepping on the brake while pushing the Start / Stop button. See a helpful video here.
Finally, the Buick Enclave gets keyless start for the first time in 2018. The back up spot is beneath the rubber mat at the bottom of the center console. Remove the mat and place the transmitter on the fob-shaped depression that is now visible. As always, with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal. We’ll post more information as it comes available.
Note: If you have made an attempt to start the vehicle without success, there may be residual pressure in the brake system and a new warning light may appear (left) or text message to Step on the Brake. Press the brake pedal very, very hard when trying to start the vehicle again to be sure that the release switch behind the pedal is engaged. Or wait a few minutes and try again.
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
Finally, if you need another manufacturer, click here.
Retrieving the mechanical key
Buick uses the last two of GM’s three key fob (remote control or ‘clicker’) styles. Style 2 is a flip key, shown to the right. Simply press the unmarked chrome button to extend the mechanical key. It remains attached to the key fob.
If a key hole is visible at the back of the driver’s door handle, use the mechanical key to unlock the driver’s door. If a key hole is not visible, see below.
With the Style 3 key fob the mechanical key must removed from the fob for use getting into the vehicle. To remove the mechanical key, press the button on the side of the transmitter near the key ring, as shown, and pull the key out.
Once again, if a key hole is visible at the back of the driver’s door handle, use the mechanical key to unlock the driver’s door. If a key hole is not visible, see below.
Getting Inside
In the majority of Buick models, a key hole is visible at the back of the driver’s door handle. So, simply insert the mechanical key and turn and you’re inside.
However, in the 2016 model year, Buick joined other GM models, hiding the key hole behind a cap at the back of the handle. The first models affected include the Envision and Lacrosse. The remaining models have followed suit.
In these cases, the cap must be removed to reveal the key hole. To remove the cap, pull the door handle out to the open position. Insert the key into the slot on the bottom of the cap (3, right). Push it as far upwards as possible, then pry outward. And yes, you WILL feel like you are prying off a piece of your car! Move the cap rearward revealing the key cylinder. Now the mechanical key can be used in the cylinder. Look for a videohere to help.
Then came the new Envista in 2024. The key hole or lock cylinder is hiding behind an oval cap seen towards the rear of the driver’s door handle (right). It will need to be removed to expose the cylinder.
To remove the cap, pull the door handle to the open position. Look for a spot behind the oval cap that can accept the key (right). Insert the key into the spot and press the key inward. This will allow the cap to move. Move it towards the rear and remove it. The key hole is now visible and the door can be unlocked.
To replace the first cap, insert the two tabs at the back of the cap between the black seal and the metal base. Pull the door handle out to the door open position and move the cap forward and press to snap it into place. You can then release the door handle.
To replace the oval cap, insert the tab found at the back of the cap into the edge of door handle. Press the cap into place.
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY