New Chevrolet Video
New Chevrolet VideoWe recently added a new Chevrolet video to our YouTube channel. It is specifically for 2019 through 2024 Equinox keyless start models with a dead key fob battery. And yes there is a way to get in and get going. The process will also work with 2017 and later Cruze models, as well as all Sonic and Blazer models.
These models all use a back up location that is the front cup holder. They also feature a hidden key hole, which we show how to uncover.
We’ve added the video to our Chevrolet video page, which now features 19 videos. You can find them all here at this link. The new video can be seen here.
Smart Keys or Intelligent Keys, or Access Keys – or whatever the manufacturer of your chooses to call them – that let you into your car and start it with just a touch use up their internal batteries at alarming rates, catching busy drivers unawares – even though the car had tried to warn you.
Our goal is to help you feel safe – and keep you moving or get you moving if at all possible – rather than leave you fretting whenever your key fob stops working. The instructions for getting into and starting most keyless start cars can be found on our pages – without roadside assistance.
Remember to replace the batteries in your key fobs at the first moment you see a warning on your instrument panel!
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
Holden uses three key fob or transmitter styles. To get in the vehicle when the key fob battery is dead, a mechanical key will have to retrieved from the fob and used to unlock the car.
The next two (shown to the right) feature a removable mechanical key and are quite similar (one has more buttons than the other). Each has a button on the side of the transmitter (remote control or ‘clicker’) near the key ring end. Press the button, as shown, and pull the key out.
The Commodore, Acadia and and Equinox models are hiding their key holes behind a cover at the back of the driver’s door handle. To remove the cap on the Acadia and Equinox, pull the door handle out to the open position. Insert the key into the slot on the bottom of the cap (number 3, right).
The cap on the Commodore is slightly different but there is still a slot under the cap. Insert the mechanical key into the slot and again hold upward pressure. Then rotate the key upward until the cap comes away.
In the Commodore, open the cover of the center console storage area in front of the shift lever. Place the transmitter in the transmitter pocket beside the power outlet, with the buttons facing up as shown in the image. Remove any additional items that might be in the area. Press the brake pedal and the engine Start / Stop button and you’ll be on your way.
The Equinox uses the left side cup holder as a back up location. Make sure there is nothing, particularly coins, in the cup holder, and simply drop the fob into it with the buttons facing up. The car will recognize the fob and pressing the brake pedal and Start / Stop ignition button will have you on your way.
The Trax, also uses a cup holder as its back up spot. However, there are three cup holders in the center console area, and the choice is the front and is separated from the two behind it. Be sure to use the one in the very front (see the image to right). Drop the key fob into the front cup holder, buttons up, and start the car as normal, using the Start / Stop button while stepping on the brake pedal.
The Spark uses a unique back up start location. The electronic key fob is placed in the center console transmitter pocket, which is in front of the cup holder and alongside the brake handle (image to the left). While in Park, press the brake pedal and press the engine Start/Stop button and you will be on your way.
Finally, the Acadia uses a back up pocket located in the back of the center console (image to the right). Drop transmitter or key fob into the pocket with the key ring up and the buttons facing the front. With the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal. Once again, you will be underway.
Note: If you have made an attempt to start the vehicle without success, there may be residual pressure in the brake system and a new warning light may appear (left) or text message to Step on the Brake. Press the brake pedal very, very hard when trying to start the vehicle again to be sure that the release switch behind the pedal is engaged. Or wait a few minutes and try again.
Holden Dashboard Symbols
Chevrolet Dashboard Symbols
