Driver Assist
This is an Advanced Driver Assistance Systems or ADAS Status Indicator symbol. As shown the, ADAS indicator shows green on both sides, and is thus ready. The color can vary depending on circumstances. The symbol is meant to show the proper lane, another car travelling ahead, and the distance to that car, represented by the horizontal white lines. ACC is working to keep that distance, and thus the number of lines, constant.
- Before continuing, are you sure this is your symbol?? If yes, then read on below.
- Otherwise, you can return to our main Picture Symbols page and scan again!
The manufacturer using this variant has the symbol associated with Adaptive Cruise Control (ACC), Lane Keeping Assist (LKA) and Highway ASsist (HAS), creating the full ADAS. Examples of variability include one side turning yellow/amber if the vehicle drifts too far that side (LKA) and torque is being applied to return to center, or yellow/amber horizontally if the distance to a vehicle ahead begins to shrink.
The entire set is associated more strongly with message centers, but as these displays advance, many more color options are available, including the deep blue background and they begin to meld with more traditional picture symbols.
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
These are all Lane Departure Warning (
Note that with some manufacturers, that these systems are moving to active rather than simple warning status. This is to say that vehicles properly equipped will actually turn the steering wheel enough to remain in the proper lane (LDP above). Seen in 
A warning chime may also be heard. The symbols look like a car in a lane or leaving a lane (or breaking through a fence!), or like lane markers with arrows pointing at them or just the markers. A steady black and white light indicates that lane keeping is not ready; 
We now have a manufacturer who is using the first symbol to the left and seen above as well as a fault indicator. But more importantly, it is using the next two images in 
One manufacturer has chosen to combine the symbol on the left with the 
Another has added the Hands on Steering Wheel Indicator, but remains intended for the lane keeping system. The driver’s hands should, in fact, be on the wheel. In 
Images seen in shades of black and white are seen in the vehicle’s center information display. Here yet another manufacturer uses the lane lines simply to indicate the system is active. Another uses the image to indicate the system is active and lane lines are detected. It goes gray if lane lines are not detected. The last one, white on black, says the system is on, but no lines are detected. Only the particular manufacturer’s owner’s manual will determine what any given light indicates.
The addition of a star indicates that a particular driver’s preferences have been activated. As above, a steady black and white light may also be used to indicate that lane keeping is not ready; 
In this case, the manufacturer displays the lane lines and turns one side 
The light is 
These are Lane Change Assist (LCA) indicators, part of a Highway Driving Assist system. We’re showing two colors here, but in fact the system moves through four colors depending on the circumstance. In white, the system is off. In gray, the system is on stand by. In 
A 
And there is this variation, called Lane Centering, which features indicators with either arrows on either side of lane markings and a car or one that replaces the arrows with a steering wheel (right). This last point indicates the need to keep both hands on the wheel.
These versions, an LDW light, blinks if the system is active and the lane markers are approached. If any of these lights remain on in 
The picture symbol on the right, which adds the exclamation point to the image of a car leaving a lane, is also used by some manufacturers to indicate a fault.
With the use of LKAS acronym, the