Scion Symbols
So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster.
The following are warning lights and indicators found in vehicles built by Scion. Click the link to the right of each one to learn more.
How They Are Presented
They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are over 50 of them, so search carefully!
Models examined include FR-S, iA, iQ, iM, tC, xA, xB, and xD.
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
ignition button with the Toyota, Scion or Lexus logo facing the button or switch. Press the Start / Stop button, keeping the brake pedal depressed. You can even press the button with the fob itself.
The new (2020) Toyota Supra is an exception. There is an image of a key with lines radiating from it on the side of the steering column. Hold the back of the remote control (NOT the tip like the image) against the marked area on the steering column and press the Start/Stop button within 10 seconds while depressing the brake.
Another exception is the Toyota Prius in the 2004 through 2009 model years. These cars have a slot beneath the Start/Stop button that will accept the key fob. Insert the fob, buttons up, then press the Start/Stop button while depressing the brake pedal as normal.
A final exception (right) is found in early Lexus LS models. It uses a key fob with a tapered end and a start cylinder that is turned to start the car. In this case, the taped end of the fob is inserted into the start cylinder. The car will recognize the key fob, which can then be used to turn the cylinder.
message to Step on the Brake. Press the brake pedal very, very hard when trying to start the vehicle again to be sure that the release switch behind the pedal is engaged. Or wait a few minutes and try again.
Four key fob (remote control or ‘clicker’) versions may be seen in Toyota, Lexus and Scion models. The earliest version (left), used only in the Lexus LS for a few years, the mechanical key remains attached to the key fob. Pull the latch found on top of the fob. At the same time, slide the lever on the side upward until the key blade is fully exposed.
The mechanical key is removed from the remaining fob styles. Slide the catch on the top of most Lexus key fobs, or on the side of Toyota and Scion models. Some later 
Lexus models use this key as well. Pull the key ring from the fob while the catch is slid to one side to remove the emergency or mechanical key blade.
A slight variation in even later Lexus models has the slide lever on the top of the key ring end, but not on the mechanical key itself. Slide the lever and pull the key ring away to retrieve the mechanical key.
If the keyhole is not visible, insert the mechanical key into the slot at the base of the door lock cover located near the back of the driver’s door handle and lift slightly to pry away the lock cover and expose the lock cylinder. If you are in the dark, you may need to feel for the slot. Yes, you must pry off a piece of the car. Insert the key blade into the now-exposed lock cylinder to operate. The key can only be inserted in one direction, so turn the key over and try again if it does not go in the first time.
If you do not see a seam or a keyhole, you have the latest Lexus models, the NX, UX and RC as well as RX models built after 2016. This door handle style has since been incorporated into ES and LS models. Pull the driver’s door handle out as shown in the image to expose the keyhole. Insert the mechanical key and turn and you’re in. There is only a small amount of space, so actually turning the key can be a chore.
If you are fortunate enough to own the Lexus LC models, the door handles are flush to the body. Press the front of the driver’s door handle inwards, then pull the rear of the handle out. The key hole is then exposed behind the rear portion of the handle. As above, insert the key and turn and you’re in.
Finally, with the re-introduced Toyota Supra in 2020 come open and start features clearly taken from BMW! The key hole is hiding behind an oval shaped cover at the back of the driver’s door handle. Pull the door handle out and feel for a metal clip is behind the cap and give it a push outward.
The cap will practically fly off revealing the key cylinder. You are still removing a piece of your car and its still ok! Let go of the handle and use the mechanical key to unlock the door using the key cylinder that is now visible through the handle and you’ll be inside.
New in 2023, Lexus NX, RX, RZ and TX feature a rectangular pry off cover (right) at the back of the driver’s door handle. Slip a credit card or some equivalent into a gap at the front of the cover and pry the cover outward. When the cover clears the handle, push it from the rear to remove it fully. The key hole will then be exposed.