How to Start a Buick with a Dead Key Fob
Starting Your Buick
- But first, if you are still locked out, click here for help getting inside!
- Second for video help, click here!
- Finally, if you need another manufacturer, click here.
GM vehicles use three different style keys, of which Buick uses the last two. There are several starting options, and we have videos here.
So, find your model, and if the main start battery is still good, we’ll get you underway…
Verano, Regal, LaCrosse (pre 2014)
With the flip key key fob, the mechanical key remains attached to the fob, but several back-up locations are used. In the Buick Verano, Regal (through 2017) and pre-2014 LaCrosse, remove the cup holder from the center console in front of the storage area. This may be the entire cup holder assembly (above right), or simply a cup holder insert (below right).
Look for a notch at the top rear of the cup holders to insert a finger or tool to aide removal. Then place the transmitter in the transmitter pocket with the buttons facing up. The pocket will be shaped somewhat like the key fob.
Note that, as can be seen, the console areas look different from model to model, but the pocket is indeed beneath the cup holders. With the key fob in place and with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal.
Regal
The back up location is changed in the Regal beginning with the 2018 model year, and the car uses a newer key fob. The spot is in a narrow compartment at the front of the center console, as can be seen in the image at right. And for the first time in any GM vehicle, the spot is marked. There is an image of a padlock with lines radiating from it, meant to invoke radio waves.
Place the key fob in the compartment and step on the brake and start the vehicle as normal using the Start / Stop button.
LaCrosse, 2014
For the LaCrosse in 2014 and later, the transmitter pocket is moved into the storage area inside the armrest near the auxiliary power, USB and audio ports (right). Place the transmitter in the pocket.
Once again, with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal. Look for video help here.
Encore, Envision early
The newest key style was introduced in 2014. It features a removable key. Note that there are still some flip keys in use. The Buick Encore, with exception, and Envision, until 2021, crossovers will use this spot. Simply drop the key fob into the front cup holder with the buttons up, and start the car as normal. Check out videos for these models here.
Encore, Envista
The exception is the Encore GX, beginning with the 2020 model. There is a small depression at the rear of a tray on the center console that is just in front of the center console storage area. This is the back up spot. The new Envista model introduced in 2024 uses this spot as well. Drop the key fob onto this spot with the buttons up and start the car as normal, again pressing the Start / Stop button while stepping on the brake.
Envision, 2021 and later
And the 2021 Envision finds the back up spot moved to the front of the center console storage area, See the image to the right. Inside and at the front of the console there is a small, flat depression. Drop the key fob onto this spot with the buttons facing up and start the vehicle as normal, stepping on the brake while pushing the Start / Stop button. See a helpful video here.
Enclave
Finally, the Buick Enclave gets keyless start for the first time in 2018. The back up spot is beneath the rubber mat at the bottom of the center console. Remove the mat and place the transmitter on the fob-shaped depression that is now visible. As always, with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal. We’ll post more information as it comes available.
Note: If you have made an attempt to start the vehicle without success, there may be residual pressure in the brake system and a new warning light may appear (left) or text 
message to Step on the Brake. Press the brake pedal very, very hard when trying to start the vehicle again to be sure that the release switch behind the pedal is engaged. Or wait a few minutes and try again.
… Return to Part I, Getting In
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
Buick uses the last two of GM’s three key fob (remote control or ‘clicker’) styles. Style 2 is a flip key, shown to the right. Simply press the unmarked chrome button to extend the mechanical key. It remains attached to the key fob.
With the Style 3 key fob the mechanical key must removed from the fob for use getting into the vehicle. To remove the mechanical key, press the button on the side of the transmitter near the key ring, as shown, and pull the key out.
In these cases, the cap must be removed to reveal the key hole. To remove the cap, pull the door handle out to the open position. Insert the key into the slot on the bottom of the cap (3, right). Push it as far upwards as possible, then pry outward. And yes, you WILL feel like you are prying off a piece of your car! Move the cap rearward revealing the key cylinder. Now the mechanical key can be used in the cylinder. Look for a video 
Envista
the oval cap that can accept the key (right). Insert the key into the spot and press the key inward. This will allow the cap to move. Move it towards the rear and remove it. The key hole is now visible and the door can be unlocked.
The MKS is unique in using the glove box as the location for the backup slot. It is to the far right side under the glove box door, and may be difficult to reach. Slip the Intelligent Access key down into the slot with buttons facing out and with key ring up or out. See the image.
bit.
In 2018, the Navigator location is moved to the back wall inside the center console (right). It should look like a pocket anchored to the back wall. Slip the key fob in vertically with the buttons facing forward.
beneath the rear cup holder. Remove the bottom liner from the cup holder by pulling it up by the tab (see image to the right). The slot is then revealed. Drop the fob into the slot with the buttons facing the rear of the rear of the car.
the front wall structure ( lower right). For this model, the key fob should be placed on its side with the buttons facing the back of the console.
In MKT, MKZ Hybrid (2013) and new (2017) Continental models, the slot is found near the Auxiliary, USB and power ports in the center console, like the one shown. The Intelligent Access key is slipped in with the buttons facing out and the key ring up (in one vehicle we tested, the vehicle started with the buttons facing either direction).
In the MKC and MKX (through 2015), the backup slot is to the front of center console, also found near the Auxiliary, USB and power ports, as shown. The Intelligent Access key is slipped in with the buttons facing out and the key ring up. The slot is impossible to see and you may want to feel for the ribbing at the bottom of the slot.
In 2016, the back up slot in the MKX is moved to the bottom of the center console. The Nautilus, new in 2019, uses this location as well. There is a visible depression in the console’s floor the shape of the key fob. Place the fob in the depression with the buttons up and key ring end facing forward.
In 2024, the back up slot in the Nautilus is moved to the front of the center console (image right). Slip the fob in with the buttons facing the rear.
New in the 2014 MKZ and MKZ Hybrid the backup slot is hidden under one of the cup holders.
(IA) (remote control or ‘clicker’) key styles. Two of the key fobs use a sliding release on the back side to release the key. Two new key fobs use a push button to release the mechanical key, and one is much easier than the other to use. Another holds the key inside the fob itself and is really difficult to remove.
To release the mechanical key blade in your IA key fob, slide the release on the back of the transmitter and pull the blade out. You can now use the mechanical key to unlock the driver’s door.
(pull is straight up and off) to access the key blade. Its awkward and may need a little practice. That mechanical key can now be used to unlock the driver’s door.
This fourth and unusual Intelligent Access key fob is found with only a handful of Ford models. The mechanical key blade is found on the back of the fob. To remove it, push the buttons on either side of the key fob.
to use. It has a push button on the front of the mechanical key itself near the key ring space. Simply push the button and pull the mechanical key away from the IA key.
However, the 2017 Continental and then the 2020 Aviator and the 2024 Nautilus bring a very new wrinkle into the mix. The key hole is hidden by a spring-loaded cover and is in a very different location. The key hole has been placed in the chrome molding beneath the driver’s door mirror and behind the imprinted words ‘Continental’, ‘Aviator’ or ‘Nautilus’. Simply insert the key and turn to unlock the car. The door will spring open. We still in 2024 have no word on how well the key hole cover will behave in icy weather.
In addition, the Navigator, updated in 2018, hides the keyhole in plain sight. The door handle is a single piece. The key hole is exposed by simply pulling the driver’s door handle away from the body of the car. It is seen angled outward at the back end of the handle. Insert the mechanical key and turn clockwise. Remove the key and release the handle. The door will open on the next pull. Note that the alarm will sound in a minute or so if the car is not started in time.
Finally, the new Nautilus model hides the key hole under a cap at the back of the driver’s door handle, which must be removed. To do this, insert the key blade into the slot on the bottom of the handle (right image, bottom arrow) and press up. While holding that upward pressure, move the cap rearward to release it. Gently remove the key while doing so. Yes, the effect is that of prying off a piece of your car but its OK and necessary!