Cadillac Symbols
Cadillac SymbolsSo, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster.
The following are warning lights and indicators found in vehicles built by Cadillac. Click the link to the right of each one to learn more.
How They Are Presented
They are ordered primarily by color and roughly by importance. First up are red, followed by yellow/amber/orange symbols (depending on how you see the color!), then blue and green symbols and finally white and gray scale symbols. There are nearly 80 of them so be patient!
Need the symbols for another manufacturer? Click here!
Models examined include ATS, CT6, CTX, Escalade, Escalade ESV, Lyriq, XT4, XT5, and XTS.
——————————————————————-
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.
The author has 25 years of automotive experience and has assembled the most extensive collection of symbols and warning lights anywhere (over 1,000!) and can help you open and start any keyless start car with a dead key fob battery. BA, St. Joseph’s College, ME: MS, Rensselaer Polytechnic Institute, NY
Here’s the deal: Buckle up, find your model, and if the main start battery is still good, we’ll get you underway.
With Style 1 (square) key fob, used in most GM vehicles prior to 2014, and in some Cadillac CTS Coupes and Sedans ongoing, place the transmitter in the transmitter pocket at the top and rear of the center console storage area with the buttons facing towards the front of the vehicle (right).
The XLR Coupe use either a small key fob that does not hold a mechanical key or the Style 1 fob. Regardless of the key fob type, the pocket for the transmitter (or fob) is on the left of the inside of the glove box. Place the transmitter in the pocket with the buttons facing the glove box storage area (right).
In the Cadillac SRX, the transmitter pocket is located at the bottom of the console storage area (right). The new CT5 crossover uses this location as well, but using the Style 3 key fob. The spot may be beneath a storage tray, which must be lifted out, or at least beneath all the stuff that has gathered inside. Then insert the transmitter with the buttons facing up and with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal.
The new key style, Style 3, was introduced in 2014. In the ELR Coupe and some CTS Sedans and Wagons (later models all use this location), locate the transmitter pocket on the shelf in the front of the console, as shown to the right. It is beneath a rubber that will need to be removed, and is the shape of the transmitter. Place the transmitter in the pocket, buttons facing up, and with the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal.
In the XTS sedan, the transmitter pocket is found in the front of the center console storage area. A storage tray may have to be lifted out. Place the transmitter in the pocket with the key ring up and the buttons facing out. See the image below. With the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal. Check out the video 
In ATS sedan, the transmitter pocket is located in the face of the front of the inside of the center console, similar to or as shown to the right. Slide the transmitter into the pocket with the key ring facing out and buttons up. With the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal.
CT6
previously in a Cadillac model. And the Escalade went along for the ride.
Meanwhile, the new CT4, CT5 and Lyriq EV models, for no apparently good reason, use the rear cup holder as the back up start location. Again, make sure the cup holder is empty and that the key fob’s buttons are facing up. With the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal to start the vehicle.
In the XT5 and XT6 SUVs, clear away anything being stored in the center console. At the bottom near the back, there is a depression shaped like the Cadillac key fob. Set the fob down in the depression with the buttons facing up. With the vehicle in Park or Neutral, step on the brake pedal and press the Start / Stop ignition button as normal.
pocket also located in the face of the front of the inside of the center console. However, the pocket points down, as shown to the right. The pocket in the Escalade is placed to the center and a bit lower. Slide the transmitter into the pocket with the key ring facing out, buttons forward (in a Suburban we had on hand, the engine started with the buttons facing either way). It is a loose fit, so don’t be concerned. With the vehicle in Park or Neutral, press the brake pedal and the Start / Stop ignition button as normal. Check out the video 
message to Step on the Brake. Press the brake pedal very, very hard when trying to start the vehicle again to be sure that the release switch behind the pedal is engaged. Or wait a few minutes and try again.
fob (remote control or ‘clicker’) styles, and two (GM Styles 1 and 3) have mechanical keys embedded inside. That key will be used to unlock the driver’s door or the trunk (yes, the trunk) and in some cases to remove a piece of the car!
The Style 3 key fob is similar to Style 1, in that the mechanical key is removed from the fob for use getting into the vehicle. To remove the mechanical key, press the button on the side of the transmitter near the key ring, as shown, and pull out the key.
CT4, CT6, CTS, XT4, XT5, XT6, XTS, ATS
key hole. The cylinder is hidden in the same place and manner, but the cap is the top, 1/8 of an inch portion. To remove it, the door handle must be pulled fully open. Then, push the cap towards the handle to release it. It may take a bit of force to accomplish this. See two videos 
Then in 2020, Cadillac came up with a whole new cap. As with the first style, there is a slot beneath the cap (right). The handle is first identified by its more curved appearance front to back and a separation near the top. Only the bottom can be removed. It is found on the Escalade and CT5.
cover frees. It will pop out about 1/8 of an inch. Remove the key – do not pry or pull with it. Once free, the cap simply swings up and can be pulled away (right).
The CTS, XLR and ELR Coupes have flush door handles (left image) with no key holes
at all. They have a very different trick up their sleeves.
We have two videos for coupes