Replacing a Standard Toyota Key Battery

Toyota Key Battery

My brother was having some trouble with his Toyota remote and actually thought it would need to be replaced. So rather than leave him to spend what’s likely a lot of money, we went ahead and opened it up. We did a video as well that you can see here.

There is a gap upper corner that is your way in. A small screwdriver will do the trick.

Note right away that the buttons are loose and keeping the button side down would be helpful. Also, the buttons only fit in one spot each, so not to worry.

The battery is found in a case inside the key and it too needs to be separated. Check out the video for instructions and have a CR 2016 battery on hand. There is a circuit board inside that is loose and also goes in just one way.

See more videos for Toyota keys and fob battery replacements here.

Smart Keys or Intelligent Keys, or Access Keys – or whatever the manufacturer of your chooses to call them – that let you into your car and start it with just a touch use up their internal batteries at alarming rates, catching busy drivers unawares – even though the car had tried to warn you.

Our goal is to help you feel safe – and keep you moving or get you moving if at all possible – rather than leave you fretting whenever your key fob stops working. The instructions for getting into and starting most keyless start cars can be found on our pages – without roadside assistance.

——————————————————————-

The information on this website is provided for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.

Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.

Disclaimer and Privacy Policy